ceramic ceramic glass tungsten (metalized) gold / nickel (surface) / (under) compliant lid base sealing terminal terminal plating rohs 91smop 91smop package item package item 82 crystal clock oscillators clk osc tf t t 90% or 80% v dd 10% or 20% v dd ov dc symmetry=t/t 100(%) 50% v dd tr gnd v oh ("1"level) v ol ("0"level) v dd 7.0 0.2 5.0 0.2 1.6 0.15 0.05max. 1.1 1.4 1.4 3.68 5.08 1.1 2.8 #3 #4 #2 #1 #2 #1 #3 #4 pin 1 connection "l" 2 gnd 3z open or "h" output z : high impedance 4v dd 91smop output waveform v dc power supply cl : including fixture and probe capacitance. v dd v dd cl t est point #2 #3 output tri-state gnd #1 #4 0.01 f ? 0.1 f e/d sw a test circuit 1.8 3.28 1.8 2.0 2.2 2.0 5.08 0.01 f ? 0.1 f soldering pattern 91smop 91smop (+3.0v, +3.3v or +5v programmable models) standard smd clock oscillators standard specifications item specifications standard specifications package data 91smop t 1 1.000 mhz to 200.000 mhz 1.000 mhz to 80.000 mhz 91smop(a) : ? 100 ppm 91smop(j) : ? 100 ppm 91smop(b) : ? 50 ppm 91smop(k) : ? 50 ppm - 20?c to 75?c 3.0v ? 10%, 3.3v ? 10% or 5v ? 10% 3.0v & 3.3v models smi p/n 3.0v & 3.3v models smi p/n v ih : 2.2 v dd min. 91smop(3va)oe v ih : 2.2 v dd min. 91smop(3vj)oe v il : 0.5 v dd max. 91smop(3vb)oe v il : 0.5 v dd max. 91smop(3vk)oe 5v models smi p/n 5v models smi p/n v ih : 4.0 v dd min. 91smop(5va)oe v ih : 4.0 v dd min. 91smop(5vj)oe v il : 0.5 v dd max. 91smop(5vb)oe v il : 0.5 v dd max. 91smop(5vk)oe 3.0v & 3.3v models smi p/n 3.0v & 3.3v models smi p/n v ih : 2.2 v dd min. 91smop(3va)sb v ih : 2.2 v dd min. 91smop(3vj)sb v il : 0.5 v dd max. 91smop(3vb)sb v il : 0.5 v dd max. 91smop(3vk)sb 5v models smi p/n 5v models smi p/n v ih : 4.0 v dd min. 91smop(5va)sb v ih : 4.0 v dd min. 91smop(5vj)sb v il : 0.5 v dd max. 91smop(5vb)sb v il : 0.5 v dd max. 91smop(5vk)sb - 0.5v to 7.0v dc - 55?c to 125?c 30 ma max. 20 ma max. 30 ma max. 20 ma max. 50 ma max. 30 ma max. 50 a max. (v dd = 3.0v & pin #1=v il ) 45% to 55% at 50%v dd level (1.00mhz to 80.00mhz) 40% to 60% at 50%v dd level (80.00mhz to 200.00mhz) 5 ns max. (20%v dd to 80%v dd level) v ol : 10%v dd max. (1.00mhz to 130.00mhz) v ol : 20%v dd max. (130.00mhz to 200.00mhz) v oh : 90%v dd min. (1.00mhz to 130.00mhz) v oh : 80%v dd min. (130.00mhz to 200.00mhz) 15 pf max. (cmos) 50 pf max. (cmos) 100 ns max. 150 ns max.(oe models) 10 ms max.(stand-by models) 10 ms max. 100, 200, 250 max. (depending on frequencies) ? 5 ppm max. at 25?c ? 3?c for first year 250?c ? 10?c for 10 seconds 170?c ? 10?c for 1 to 2 minutes (preheating) using pll technology ( t 1) final exact part number to be determined with frequency, frequency stability, operating temperature and input voltage. e.g. 91smop(3.3va)sb 200.000 mhz. ( t 2) internal crystal oscillation to continue (pin #1=v il ). ( t 3) internal crystal oscillation to be halted (pin #1=v il ). generic part number frequency range frequency stability ( - 20?c to 75?c) over all conditions operating conditions operating temperature input voltage (v dd ) tri-state control (option1) oe control voltage (pin#1)/(pin#3) open output v ih output v il high impedance t 2 tri-state control (option2) stand-by (sb) control voltage (pin#1)/(pin#3) open output v ih output v il high impedance t 3 absolute max. ratings supply voltage storage temperature input current 3.0v ? 10% (pin#1=open or v ih ) 3.0v ? 10% 5v ? 10% stand - by current t 3 (option) output ( - 20?c to 75?c) symmetry rise and fall times "0" level "1" level load disable delay time enable delay time startup time jitter (psp-p) aging (non operating) reflow condition ( t 2) internal crystal oscillation to continue. ( t 3) internal crystal oscillation to stop. a 7.4 5.4 16.0 7.5 8.0 1.5 0.3 1.9 180 1000pcs qty/reel b c d f j l m reel dia. 4.0 0.1 2.0 0.1 1.75 0.1 + 0.1 - 0 1.5 l b f d a c j m t ape specifications actual size
|
